Product Details
- Item Weight: 1 pounds
- Shipping Weight: 1 pounds (View shipping rates and policies)
- ASIN: B000F38SZ6
By : Tippmann
List Price :
Price : $38.00
You Save : $61.99 (62%)
Product Description
Description This upgrade gives your Tippmann 98, 98 Custom, or Custom Pro Paintball gun the Mil-Sim Assault Style look, will also fit the BT-16 paintball gun. The Barrel is 16" in length and provides extreme accuracy. This is a much better barrel than the other Mil-Sim Barrels. It is ported for stealth. The shroud is much larger and realistic. These are brand new with warranty. The orange cap is just too show that this is not an actual military barrel. The barrel you get will not come with the orange cap.
16" Tippmann 98 Custom M4 Assault Sniper Barrel
Customer Reviews
Like a previous review I really like the barrel but did find it rather difficult to get it to stay on and be lined up perfectly with the notch (sight). I found his instructions confusing so I will take my shot at it.
1. Take the barrel off if you have it on already.
2. unscrew the tip of the barrel head (I didn't know the small piece at the end of the barrel screwed off in the first place)
3. Use allan key to unscrew the notch (sight) of the barrel. Slide it off the barrel
4. Unscrew the body of the barrel with allan keys (3 screws). Slide the body off of the barrel including the metal rod attached to it. (You should do all these steps after playing to clean the barrel correctly).
5. Now screw on the now normal looking barrel onto your Tippman. (Make sure it's on tight)
6. Put the body of the barrel on and line it up
7. Slide in the metal rod until there is only about an inch left sticking outside of the body
8. Tighten the body with the allan key (3 screws)
9. Slide the notch on and slide it into the metal rod
10. Line up the notch perfectly and then screw it in with your allan key
11. Finally, screw on the tip of the barrel and your all set. Your barrel won't seem lose anymore.
PS - I purchased this barrel on amazon and use Kinek to ship it to a cross border KinekPoint. If your Canadian you save huge in international shipping and brokerage fees. I am telling everyone I know about everything I buy online.
at first this barrel seemed like a waste of money because i just couldn't figure out why in the hell it wasn't staying on. but after a day or two of searching i out how to put it on so for anyone interested in this her you go.
screw the barrel in and then put the metal "cap" on the end and but the sight into the little holes and see where the sight lines up if it isn't then take off the cap and sight and pull down on the circle thing at the bottom of the barrel and pull apart the barrel shroud. there is square piece with a hole in it loosen that with an allan key and move it so that when you put the barrel shroud back the "cap" and the sight it lines up. so you tight that up then put the shroud back on then you put the cap on then put the sight in the two little holes on the cap then get the allan key and underneath the sight by the metal sling part there is another hole to tight that up against the barrel.
hope that helped now onto the product the barrel is pretty good i upped my velocity a little bit and it was pretty dead on so i like this barrel a lot and it gives you the look and feel of a m4.
the reason this is only getting 4 stars is the fact there is no instructions in the packaging but it is really cheap these can be $70 plus in stores and dorosports ships fast
Related Product
0 comments:
Post a Comment